Ball and Socket Webcam Mount for Logitech 270/310
Description
--- Updated With A Fully Printable Design That Does Not Need Metal Screws -- 1X Full-3D-Printable-Non-Threaded-Side -- 1 X Full-3D-Printable-Screw -- 2X Full-3D-Printable-Threaded-Side -- Camera_Holder -- Clamp With Attached Ball -- Clamp Screw I Made A Webcam Mount That Can Be Easily Customized. The Ball Socket Joint Receives A 10Mm Sphere And The Stem Is 20Mm Long From The Center. This Mount Can Be Placed Various Positions, I'Ve Even Mounted It To My Extruder. The Arm Uses 2X M4 X 30Mm Screws And M4 Nuts. I'Ve Found This Model To Be Very Strong If Printed In Petg. Pla Works But Is Brittle And Cannot Be Tightened Hard. Printed With 35% Infill Supports Only On The Camera Holder -- Updated The Download To Include 1X Female Joint So You Don'T Need To Reprint Both If You Break One Or Get A Misprint. -- Updated Files For Single Female Joint. Remove The 1 Of The 2 5Mm Spacers. -- Added A Clamp With Attached Ball -- Added A Separate Stl For The Clamp Screw, -- Add A Larger Clamp 62Mm
Statistics
Likes
154
Downloads
0