Modified parametric rear sensor mount for new Anet A8
Description
This Is A Remix Of Tns' S Customizable Rear Mount Https://Www.Thingiverse.Com/Thing:2219963 To Function On A New Anet A8 (April 2017 Version With Horizontal Y-Sensor). The Original Rear Mount Would Cause The Print Head To Hit The Frame Side Before It Reaches The Sensor. The Side Cutouts Allow The Sensor Full Travel. You Will Need To Modify The Y Distance To About 64Mm Instead Of The Stock 51. The Other Issue With The Original Two Clip Version Is That It Would Not Allow My Sensor (18Mm Inductive) To Get Close Enough To The Tray. I'Ve Therefore Beefed Up The Clip Using The Existing Parameters And Only Use One Mounted On The Lowest Screw Holes. It Is Very Sturdy With Pla. I'Ve Included The Customizer Option So You Can Adjust To Your Needs. Update: Version 1.3 Fixed Issue Where Using A Sensor Size Of 8Mm Did Not Create A Working Design. Uses 2 3X10Mm Bolts For Mounting. Stock Carriage Settings: Define X_Probe_Offset_From_Extruder 10 Define Y_Probe_Offset_From_Extruder 54 Define Front_Probe_Bed_Position 60
Statistics
Likes
75
Downloads
0