Rubber grip mould
Description
Hi All! This Is An Un-Tested Mould For A Grip That Can Be Used As A Comfy Grip On A Broom, Rake, Mop, Bike Or Anywhere You Think You Can Use It. It Is Based On The Same Principle As My 2-In-1 Broom Buddy Handle/Apollo Model. You Can Download It Here - Https://Www.Cgtrader.Com/3D-Print-Models/Hobby-Diy/Hand-Tools/Broom-Buddy-3D-Printed-2-In-1-Mould To Make A Grip, Follow These Steps: 1 - Mix Up A Batch Of Proto-Putty (Silicone With Food Coloring As A Curing Agent And Corn Starch As A Filler/Anti-Sticky....Stuff) See Grant Thompson'S How-To Video Here - Https://Youtu.Be/7Fwyta5R2Mw 2 - Mould The Proto-Putty Around The Plunger. 3 - Place The Plunger Into The Mould With The Locating Pin In It'S Slot. 4 - Place The Other Side Over And Squeese Tightly. 5 - Assemble The Alignment Pieces 6 - Push The Plunger The Rest Of The Way In. 7 - Wait 20-30 Min And Dissasemble. 8 - Remove The Cured Silicone Handle And Carefully Remove The Plunger. ---Theoretically!--- I Have Yet To Test This, But The Concept Works On My Other Models.
Statistics
Likes
65
Downloads
0