Motor Mount for 22mm Brushless on Aluminum U Channel
Description
This Is A Motor Mount For A 22Mm Size Brushless Motor That Attaches The Motor To A U Channel Designed For 1/4" Plywood. For Instance, I Am Using A 2204 Size 1900Kv Motor. I Purchased A Four Foot Section Of The Channel At A Hardware Store For $5 And It Is Enough For The Arms For Two Quads Or The Arms And Body Of One Quad (250Mm To 400Mm Sizes). See Picture Of Lable For More Info On The Aluminum. You Will Need To Drill Two Holes Through The Top Side Of The Aluminum For Two Of The Motor Screws, But You Can Use The Holes In The Plastic On The Back Side As A Drill Guide. I Like This Design Because The Plastic And The Aluminum Actually Support Each Other Making Both Stronger. The Fit Is Very Tight And You Will Need An Arbor Press Or A Vise To Fit Them Together Flush. I Will Make A Body Later Using A Similar Design And Post It All Together In The Future.
Statistics
Likes
0
Downloads
0