Logitech C270 webcam Kossel XL 2020 front mount
Description
This Is A Logitech C270 Webcam Mount For 2020X3 Aluminum Profile, Designed For A Kossel Xl Printer. The Webcam Is Approximately A 10Cm Distance From The Printer, 5Cm Higher Than The Bed. It'S Perfect To View A Full Bed Of 240Cm Diameter, **If The Webcam Has A Wide Angle Lens (170°)**. By Defaut, This Is Not The Case For This Webcam, So You Need To Change The Lens. [Here Is What I Used](Https://Www.Thingiverse.Com/Make:348451). - To Assemble The Parts (Arm In The Braket), You'Ll Need A M3X12 To M3X20 Screw With A M3 Nut. - To Fix The Webcam On The Arm, You'Ll Need A M3X30 (M3X35 Works Too) And A M3 Nylstop Nut. - To Fix The Bracket On The 2020 Profile, You'Ll Need At Least 2X M3X10 Screw And 2X T-Nuts (Or 3 Of Each, As There Is 3 Holes).
Statistics
Likes
15
Downloads
0