ControlLeo2 Linear Door Opener Servo
Description
I Created This Add On Servo Door Opener For My Reflow Oven I Built Using The Controleo2 Controller. Print In A High Temp Filament As It Will Get Somewhat Hot While Reflowing. I Used Epc. The Only Object That Needs Supports Is The Body Piece Where The Servo Recess Is. The Gear Is A Remix From Https://Www.Thingiverse.Com/Thing:2049935 , You May Need To Scale It To Get It To Print Correctly For You. I Had To Print It At 110% For Mine. I'Ve Included Templates For Marking The Holes For Mounting And The Opener Arm Along With The Original Fusion 360 Design File. You Will Need 6 #2X10 Screws, 1 #0X5 Screww (For Pin) And 2 #3X12 Bolts With Washers And Nuts For Assembly. I Also Added A Front Face Panel For The Blackanddecker Oven I Used And Buttons For The Controleo2 Control Panel. Https://Www.Youtube.Com/Watch?V=Orbpoeky9H8
Statistics
Likes
11
Downloads
0