Spinning Clay Target Holder
Description
Holds 8 Clay Targets Using This Thing: Https://Www.Thingiverse.Com/Thing:2369862 Attached Is The Dxf File. Design Dimensions Are In Inches. Size The Dxf In Your Program So That The Diameter Is 14" (Not Including The "T"). See Pictures. Use A 1/8" Router Bit For The "T" Pocket And For The Screw Holes. Use A 1/4" Router Bit For The Rest Of The Cuts. Video: Https://Youtu.Be/T3_L0Ax7Eru Requires Materials: 15" X 15" X 1/2" Wood Board Or Plywood 2 X 608 Bearings 1/4" Coarse Thread Screw, 5" Long 5 X 1/4" Hex Nuts 8 X #8 X 3/4" Wood Screws 16 X Elastics Bands Some Sort Of Pole To Screw The Wheel To. Cnc Cutting. Cut The "T" Shape Only 1/4" Deep To Make A Pocket That The Skeet Holder Stl Will Fit Into. Then Cut Out The Rest Of The Wheel. Print The Spacer Stl Since The 1/4" Bolt Is Smaller Than The Inner Diameter Of The 608 Bearing. Use The Smaller Wooden Circles To Hold The Bearings To The Clay Holder Wheel Circle. Secure In Place With The #8 Wood Screws. The Skeet Holders Fit Into The Pocket Snugly But Use Elastic Bands To Hold The Skeet Holders In Place.
Statistics
Likes
52
Downloads
0