Gas Strut End, Ball joint Cup 10mm, M6x1
Description
This Is A Ball Joint Cup End For Gas Struts. It Suits A 10Mm Ball, And An M6X1 Connecting Thread. The Thread Is Modelled And Can Be Used Directly After Printing. Note The Retainer Wire Clip Is Extended Down To Touch The Print Bed For A Clean Print. Just Cut Through It In A Position Where You Get A Slight Overlap With The Retaining Wire To Keep It Captive. Retainer Wire Holes Are Sized To 1.1Mm Dia.
Statistics
Likes
9
Downloads
0