Canada 150 Birthday Fidget Spinner
Description
Canada 150 Birthday Fidget Spinner It’S Canada’S Birthday, So Let’S Celebrate With A Sweet Spinner. This Is My Little Tribute As A New Canadian. To Make The Spinner You Will Need The Following: - 6X Canadian Quarters ($1.50) - 1X 608 Bearing I Printed Abs 0.3Mm Layers At 70% Infill With 3 Solid Layers Top And Bottom. The Maple Leaf Is To The Print Bed. I Applied A Small Amount Of Elmer’S Glue Stick To The Face Of 3 Coins And Placed Them On The Print Bed To Dry. At The 15Th Layer I Dropped In A Quarter In Each Pocket. This Was Repeated At The Start Of The 18Th Layer I Dropped In The Remaining 3 Quarters Glue Side Up. You May Need To Check What Your Last Layer Is Before It Closes In. The Bearing Is Press Fit In. I Used A Touch Of Glue To Secure The Caps. There Are Probably Better Ones Out There. Enjoy.
Statistics
Likes
17
Downloads
0