Trailer Hitch Cover, Parametric with optional text
Description
This Is A Trailer Hitch Cover. It Can Be Completely Customized. It Consists Of A Rounded Plug That Goes Into The Receiver And A Plate That Covers The Back. Optionally, Text Can Be Put On The Plate - It Will Be Indented To The Depth Chosen. All Parameters Are Settable, From The Outside And Inside Of The Plug, To The Plate Size And Thickness. I Suggest Printing This In Petg Or, Possibly Abs. If You Want To Put A Political Slogan On It And Print It In Pla, That Will Likely Work If The Campaign Is Not Too Long. I Hope That It Can Be Printed Without Supports Or Rafts, With The Plate Down. Consider White Filament For The First Three Layers And Then Change To Black - So That Gives You Black Letters On A White Sheet. If You Do Not Wish To Have Lettering, You Can Just Turn It Off. Edit: The Plate Can Now Be Other Than Square, It Can Be Rectangular Or Oval (Or Square Or Circular) Again, With Or Without Lettering. The Plate Should Be Accurately Centered On The Hitch Cover. The Variable "Factor" Controls The Relative Height To Width, Numbers Lower Than 1 Mean That The Plate Is Wider Than It Is Tall, Numbers Higher Than 1 Mean That The Plate Is Taller Than It Is Wide. Use 1 To Get A Square Or Circular Hitch Cover. Again, All This Stuff Is Parametric, Just Grab Openscad
Statistics
Likes
36
Downloads
0