RC Boat 3DBenchy
Description
<B>So I Decided To Make An Rc-Benchy Boat. Its Printed With 25% Infill Abs I Printed It On My Regular Prusa Printer And My D-Bot. I Glued The Parts With Abs-Slurry (A Cup Of Acetone And Some Abs Filament For Glue) I Also Used The Slurry And Applied It To The Body To Make It Waterproof, 2-3 Layers.</B> There Is One Thing I Would Have Done Differently Then I Assembled The Motor Do Not Use A Glue Gun, Buy Some Epoxy-Glue Instead. I Have Some Small Leakage From The Motor, So I Removed All The Glue And Used Abs-Juice To Glue Those Parts Also, But Epoxy Would Have Been A Better Option. I Also Integrated The Support For The Servo In The Hull. <B>Update:</B>There Was No Valid Volume For The Bodyparts That I Had Split, But I Have Re-Uploaded Them Now So They Are Fine, But Of Course You Can Split The Fullsizebody To As Many Parts You Like. <B>The Parts I Have Been Using Is These:</B> Rc-Controller - Https://Goo.Gl/Qmhycg Esc - Https://Goo.Gl/7Bu7Ou Servo - Https://Goo.Gl/Igrlky Steel Shaft For Servo - Https://Goo.Gl/Bgjfyv Water Proof Plastic Organ Sleeve - Https://Goo.Gl/X2Dq3I Lipo Battery - Https://Goo.Gl/Sz3Hnr Lipo Battery If Not Shipping To Your Country - Https://Goo.Gl/1Ndsgf Battery Charger - Https://Goo.Gl/Arw9Yc Jet Motor - Https://Goo.Gl/6Tm7Cj Epoxy-Glue - Https://Goo.Gl/Wux3Mr Xt-Cable Converter Https://Goo.Gl/Kfvtnn 3 Mm Inner Diameter Sillicone Tube - Https://Goo.Gl/1Qedms <B>Tools:</B> 3D-Printer - Https://Goo.Gl/Vtxwfa Solderiron - Https://Goo.Gl/Se2Kiz Solder Helpinghand - Https://Goo.Gl/Nwfh0X Cutting Plier - Https://Goo.Gl/Nwfh0X Build Instructions Here: <Iframe Width="560" Height="315" Src="Https://Www.Youtube.Com/Embed/1-Mi9Vvn-Ni" Frameborder="0" Allowfullscreen></Iframe> <B>Instructables Step-By-Step Guide:</B> Http://Www.Instructables.Com/Id/Rc-Boat-3Dbenchy/ <B>You Can See It In Action Here:</B> <Iframe Width="560" Height="315" Src="Https://Www.Youtube.Com/Embed/9857T3Swp28" Frameborder="0" Allowfullscreen></Iframe> If You Like What I Do Consider Leaving A Small Tip To Support Me For More Designs, Thank You :)
Statistics
Likes
209
Downloads
0