Corner brace for 4040 lite
Description
This Is A Very Strong 90 Degree Brace For 40Mm Extrusion. I Made This To Square Up A Large Format 3D Printer Build, And It Works, But It Takes A Lot Of Filament And A Long Time To Print. I Had Some Warping On 2 Of The 5 Prints That I Did. So I Decided To Go With A 45 Degree End Cap That Uses A Piece Of Extrusion For The Bulk, Which I Will Post Later For Anyone Interested. Made For M6 X 20Mm Bolts And M6 Drop In Tee Nuts For 40 Mm Extrusion
Statistics
Likes
38
Downloads
0