Tevo Tarantula logo for 2020 profile

Tevo Tarantula logo for 2020 profile

Description

A Tarantula Logo To Attach To The Top Beam. *Inspired By Cheopisiv From The Reprap Forum : Http://Forums.Reprap.Org/Read.Php?406,637668* It Comes In Two Parts : The Frame, Which Is Intented To Be Printed With Black Filament, And Secured With 2 M4 Grub Screws, And The Colored Insert, To Match Your Own Colour Scheme. As It'S Quite Tight In The Profile, Screws Are Not Mendatory, And Allen Screws Could Actually Be Used Just For The Look. Provision Could Be Made For Some Internal Led Lighting For Further Bling Factor. One Could Also Choose To Only Print A Colored Frame, And No Insert,Resulting In A Black Tarantula Logo. The Final Version Is A 4Mm Thick One, With Short Pegs So It Sits Close To The 2020 Profile. The 8Mm Version Is Stil Available As Well As The Slim 4Mm. They Sits 2Mm Away From The Beam. A Prototype Has Been Printed, With The T Nuts On The Bed And Supports Rather Than Upside-Down. The Insert Requires To Be Sligthly Bent To Be Included In The Frame, Then The Whole Thing Has To Be Slid From A Side To The Center Of The Top Beam. Enjoy !

Statistics

Likes

13

Downloads

0