Mikleo staff from Tales of Zestiria
Description
This Is A Model For The Head And Tail Of Mikleo'S Staff From Tales Of Zestiria. The Pieces Are Modelled To Fit Onto A Schedule 40 Pvc Pipe With 1/2" Id / 0.84" Od, Which Can Be Picked Up At Your Local Hardware Store For About $2-3. It Should Be Very Easy To Change This In The Solvespace File If You Need To, Though You Probably Can'T Make It Much Bigger Without Increasing The Thickness Of The Staff Head/Tail To Compensate. This Includes Stls For The Whole Pieces, But Also Split Stls That Are Intended To Be Printable Far More Easily / Without Supports / In An 8"X8" Printer. To Make The Head, Just Print 2 Of Each Head Piece And Assemble Them However You Like (Glue + Woodfill Is Good). For The Tail, Just 2 Of The Tail Piece. Credit For The 2D Sketches (The Contours Extruded To Make The Final Stl), As Well As The Subject Of The Example Photo And Construction Of The Physical Prop, Goes To @Helios748 (Https://Twitter.Com/Helios748/). Photo Credit: @Otattemita.
Statistics
Likes
16
Downloads
0