MP Mini Feet/Stabilizer's
Description
These Are Feet I Made For My Mp Select Mini. The Original Stick On Pads Had Come Loose And Shifted, So The Base Had A Wobble To It. Then After Adding The 4Dm Maximus Bed, There Was A Major Wobble When The Bed Was Homed, As There Was Too Much Weight Hanging Off The Backside. So I Created Some Longer Feet For The Rear To Account For This Wobble. Standard Beds Should Do Fine With The Small Feet At Both The Front And Rear. I Also Have Added A "Pad" For The Small Feet To Be Printed In Tpu Or Other Flexible Filaments. This Pad Is Untested. I Used M3X10 Philips Screws, But Socket Head Screws Should Fit As Well. Stock Screws Will Not Be Long Enough To Get A Good Grip.
Statistics
Likes
14
Downloads
0