Greenworks 80v Grass Trimmer Blade System
Description
This Is A Complete System Modeled For The Greenworks 80V Electric Grass Trimmer. It May Also Work For Other Brands Of Trimmer. The Trimmer Core Was Modeled For An M10X1.25Mm Left Hand Nut. I Had To Special Order One From Ebay. Update: Bottom_Plate_1.1 Combines The Bottom Plate And The Core Spacer Into One Piece. Should Make For Easier Installation. Print All Parts In Abs At 100% Infill For Maximum Strength. You Will Require: +1@ M10X1.25 Left Hand Nut +3@ 3/4" Hex Bolts And Locking Washers +3@ 120Mmblade +1@ Trimmer_Plate_Top +1@ Bottom_Plate_1.1 +1@ Trimmer_Core Assemble The Top And Bottom Plates Using Hex Nuts/Bolts And Blades. Install The M10 Nut In The Core. Push The Core Through The Center Hole. Attach To Trimmer. Update: After Using This A Bit The Design Works Great. I Did However Bounce The Blades Off A Concrete Block And Broke The Abs Blades. Maybe Nylon Would Be A Better Option?
Statistics
Likes
23
Downloads
0