Wall Spot Lamp cnc/laser
Description
This Tiltable Wall Spot Lamp Is Intended To Be Used With A Gu10 Socket And Mounted Vertical, Over A Mirror In A Bathroom For Example. Even With Ventilation Openings Using A Classic Halogen Bulb Might Not Be The Best Of All Ideas, You Should Resort To A Modern Led Bulb. I Got The Ceramic Socket From A Hardware Store For A Few Bucks. The Cable Were Long Enough To Feed Them Through The Foot. This Build Was Done From 6.3 Mm Beech Plywood Using A Desktop Cnc-Machine By [Stepcraft](Https://Www.Zenziwerken.De/My-Cnc) With A 1.2 Mm Spiral Toothed End Mill. A [Vacuum Machine Bed](Https://Www.Zenziwerken.De/Powered-By-Sorotec/Vakuumtechnik/Vakuumtische/Lr-Tische/) Simplifies The Process Significantly, Because You Don'T Need To Camp The Material, Thus It Stays Pretty Flat. Further More I Don'T Need Tabs On The Parts Resulting In Less Sanding. Visit Https://Www.Zenziwerken.De/En/ For More Interesting Designs. Consider A Donation If You Like The Build. Keep In Mind That The Stl-File Is For Three Dimensional Viewing Purpose Only. It Will Not Print On An Fdm Printer.
Statistics
Likes
429
Downloads
0