Star Boomerang

Description

I Will Be Updating This Soon To Include A Model That Is For Intermediate Throwers With Wider And Slightly Thicker Wings. This Was My Second Attempt At A 4 Winged Boomerang. This Is A Most Definitely Expert Level Boomerang And Is Thrown Slightly Atypically. Rather Than A Typical 80-70 Degree Throw You Should Try A Lofty Throw With Around A 45 Degree Throw Or Higher. Never The Less This Boomerang Actually Comes Back With A Little Bit Of Getting Used To I Assure You, I Just Caught It Only By Moving A Few Steps About 10X In A Row. This Is A Righty Boomerang, Mirror It In The Slicer For An Easy Lefty Make. This Boomerang Is An Extreme Carver And If You Are Finding That It Arcs Up High At The Turn Around You Should Try To Push The Tapered Edge Down With Your Pointer Finger Whilst Simultaneously Pushing Up The Flat Edge With Your Thumb. Then Run This The Whole Length For Each Wing And When You Pull Away You Should Notice The Boomerang Wing Tips Are Now Slightly Below The Center. This Should Mediate Your Problem As Well As Allow This Boomerang To Be Thrown At An Angle Closer To Normal. I Get Into This Later But This Model Is Very Shock Absorbent Upon Crashing, Even When Made With Pla. I Suggest Abs For This But Pla Will Still Work All The Same, Just Not As Durable, But I Made Mine With Pla.

Statistics

Category

Tags