Enclosure for Raspberry Pi 3 + TFT3.5'' + DAC PCM5102K - Squeezebox
Description
Hi ! This Is An Enclosure For My Squeezebox Project. I Need To Install The Following Equipment Inside: - Raspberry Pi 3 : Http://Www.Gearbest.Com/Raspberry-Pi/Pp_488334.Html?Lkid=10899003 - A Waveshare (Or Clone) 3.5'' Tft For Raspberry: Https://Fr.Aliexpress.Com/Item/Free-Shipping-Lcd-Module-Pi-Tft-3-5-Inch-320-480-Touchscreen-Display-Module-Tft-For/32587995145.Html - A Dac Pcm5102K: Https://Fr.Aliexpress.Com/Item/Pcm5102-Dac-Decoder-I2S-Player-Assembled-Board-32Bit-384K-Beyond-Es9023-Pcm1794-Compatible-Raspberry-Pi/32678406932.Html I Use Max2Play As Software, But Any Linux Variant For The Pi Should Be Ok. You Can Improve My Design Using The Fusion 360 Project: Http://A360.Co/2S5Amxu #Known Issues And Release Notes: ###Initial Version (Fusion 360 V27) 1- The Screen Slot Is A Very Tight Fit With My Printer. You May Want To Print It Upscaled By 101% Or So. 2 - For Some Reason The Holes For The Rca Barrel Are Too High By About 1Mm. 3 -The Recess In The Cover Is Too Small For The Pins Sticking Out Of The Screen. 4 - The Tabs On The Cover Are Much Too Fragile. 5 - The Hole For The Jack Barrell Of The Raspi Is Too Small. 6 - The Opening For The Hdmi Slot Could Be Enlarged Too. ###First Revision (Fusion 360 V29) - Correction Of Issues 2, 3, 4, 5, 6 Of The Previous Version. 1 - The Tabs Of The Cover Are Still Very Fragile. Any Advices Welcome. Please Let Me Know If You Have Tested My Design And What You Think About It !
Statistics
Likes
42
Downloads
0