TronXY X3A E3D cooler with autolevel
Description
I Accidentally Broke The Heat Break On The Stock Tronxy X3A Hot End So I Decided To Hookup One Of My Chinese Clone "Jhead E3D V5" Hot Ends. I Couldn'T Find A Design That I Liked That Could Accommodate The Stock Autolevel Sensor On The X3A And Also The Stock Cooler On The Hot End So I Designed One For Myself. Update 27-Jun-2017: Sorry, Forgot To Upload All Design Files Yesterday. Recommend Abs Or Other Heat Resistant Filament At 35% Infill Or Greater. The Blower Duct Can Be Printed Without Support If Positioned As Shown In Pics. I Recommend Support For The Other 2 Pieces, But Only For The 90° Overhangs So It Will Be Minimal Support And Easily Removed. Update 28-Jun-2017: Finally Had Time To Print This Design And Do A Quick Test Fit. Fits Just Like The Model. I'Ll Probably Connect And Test Drive The New Hot End Tomorrow:)
Statistics
Likes
56
Downloads
0