A-10 Thunderbolt
Description
I Update And Fix This. This Is The Final, I Will Upload The Result Of The Print Soon. There Are 3 Parts. Slicer Using Cura. Top Part : No Need Support - Print Regular Middle Part : Need Support. Wall Thickness : 2 Mm Infil : 100% Support : - Touching Buildplate - Support Overhang Angle : 80 Degree - Support Pattern : Zigzag - Support Density : 15% - Use Tower (Check) Build Plate Adhesion : None Back Part : No Need Support. Infill : 100% Pla.
Statistics
Likes
32
Downloads
0