Creality CR-10 Longer Spool Holder.
Description
This Is A Longer Version Of The Creality Cr-10 Spool Holder You Need To Print 2 Nuts 1 Nutcut Spool The Nutcut Goes In Between The Metal Frame And Another Nut On The Other Side Of The Metal Frame Then Put The Last Nut On The End Of The Spool Holder And Your Good To Go! This Version Is Around 105Mm Long (Not Including Threads) So 105Mm Of Usable Spool Ride. Printed Mine At 0.28 Layer Height Nuts Fit Perfect No Problem. Enjoy
Statistics
Likes
163
Downloads
0