Atelier Shallie Shallotte Elminus Staff

Description

This Is The Head Piece For Shallotte Elminus'S Staff From The Game Atelier Shallie. This Is My First Attempt To Model A Prop In Fusion 360. Included Are Stls For The Two Main Pieces (The Metal Rod Portion And The White Swirly Part) As Well As Sliced Versions Of The Stls To Be Individually Printable. *Update: I'Ve Also Included Models For The Rest Of The Top Of The Staff Pictured In The Finished Staff Photo (The Washers And The Doughnuts), In Case You Want To Print Those Too, But They'Re Much Simpler.* The Hole Down The Middle Of The Head Piece And First Washer Is Sized For A 0.5" Outer Diameter Rod. For The Main Staff Rod, I Used A 0.75" Outer Diameter Rod (The Second Washer Is Designed To Fit Around This). For Ease Of Assembly And Disassembly, A Good Trick Is To Use The Second Washer To Hide A Joint; In My Case I Used A Threaded Rod To Screw The Two Together. To Assemble The Two Large Pieces (White Section And Metallic Section In The Included Photos/Render), You Will Need To Use A Heat Gun To Gently Heat Up The Inner Part Of The White Section. The Geometry Of The Intersection Between The Two Is Too Complicated To Snap Them Together, So The Plastic Needs To Be Slightly Softened To Be Able To Push The Metallic Piece In. Be Gentle With The Heat Gun; Move It Back And Forth For 10-15 Seconds, Try To Push It In, And Repeat. Don'T Force It Too Hard; If It Won'T Go In, Just Give It A Tad More Heat Gun And Try Again. This Should Not Be Difficult; It Only Took Me A Couple Minutes. Of Course You Could Also Modify The Print To Make Them As One Piece, But You'D Probably Need A Dual Extruder For That, Or Extremely Good Painting/Masking Skills To Get All The Nooks And Crannies Accurately. I'M Much Too Lazy For That.

Statistics

Category

Tags