Big Filament Stand System with Ball Bearing d7
Description
This Is A Big Filament Stand / Holder, But Less Than 20*20*20 So Most Of The Printer Can Print It. I'Ve Done It For D20 Filament'S Coil With A 8Cm Thickness But You Can Put A Bigger One. You Just Have To Print : - 4 Times The "Supportfil_V1_0.Stl" File (2 Times + 2 Times Mirror Version) - 12 Times The "Bitoniofil_V1_0.Stl" File - 4 Times The "Supportballbearing_V1_0.Stl" File If You Have Some Idea For The Improvement Of This Project, I'Ll Like To Heared It, May Be For A 2.0 Version. This Stand Was Made To Have No Need For Human To Work, And No Chance For The Coil To Fall After The Printer Pull The Filament. You May Wanna Add Something To Direct The Filament, But This Would Have Needed Another Piece, The Goal Was To Have The Less Pieces Possible.
Statistics
Likes
1
Downloads
0