Tevo Black Widow 15 degree extruder and BL touch mount RIGID
Description
This Is My Version Of The 15 Degree Extruder Mount Modification. It Bolts Onto The X Axis Mounting Plate In 4 Places That Are Easy To Get To From Behind. It Has An End Stop On The Rh Side So Its Easy To Assemble Nice And Square. It Also Includes A Bl Touch Mount Which Can Be Left Empty If You Don'T Have One. I Designed This To Be As Rigid And Easy To Print As Possible And I Printed It Vertically Just Like Its Mounted And Have The Following Settings 5 Vertical Shells 4 Top Shells 4 Bottom Shells 25% Infill 0.25 Layer Height For Mounting Hardware I Used 4 X M4 Socket Head Cap Screws And Nuts With Washers 2 X Standard Extruder Mount Screws 2 X Standard Bl Touch Screws And Nuts I Highly Recommend You Move The Y Axis All The Way Forward Then Unbolt 4 Grub Screws That Hold The Y Axis In Position To The Whole X And Z Axis Gantry Then When Loose Move The Assembly So The Table Edge Is Directly Above The Extruder I.E So You Achieve A Full Y Axis Print Area Of 250Mm. For Your Firmware You Want To Set The Bl Touch Offset To X Axis 42 Y Axis 15 Z Axis -2 (Approx) Do Not Use The Following Settings Unless You Understand What I Ment Above And You Understand What These Settings Do! Max Travel And Probing #Define X_Min_Pos 0 #Define Y_Min_Pos 0 #Define Z_Min_Pos 0 #Define X_Max_Pos 375 #Define Y_Max_Pos 250 #Define Z_Max_Pos 250 #Define Left_Probe_Bed_Position 60 #Define Right_Probe_Bed_Position 335 #Define Front_Probe_Bed_Position 35 #Define Back_Probe_Bed_Position 225 I Hold No Responsibility For The Use Of These Settings/Parts Or Advice.
Statistics
Likes
21
Downloads
0