PanelDue 4.2"/4.3" Slim case
Description
Your Looking At A Slim Case For The <A Href="Https://Duet3D.Com/Duetaddons/Paneldue" Target="_Blank">Paneldue 4.3"</A>. It'S A Total Of 16Mm Thick. The Matching Case For The Rear Pcb Is Also 16Mm Thick Only. Meant To Be Mounted Under The Printer. The Rear Ø3,4Mm Holes In Both Cases Are Meant For Various Mount Options, Where I'Ve Made One For Pcb-Box So Far. There Are Optional Buttons For Erase And Reset For The Pcb-Case <Strong>Bom Lcd</Strong> <Ul><Li>4X M3 Nuts - Lcd</Li> <Li>4X M3 16Mm Screws - Lcd</Li> <Li>2X M3 Xx Mm Screws - Lcd Bracket</Li> <Li>Xx To Mount Bracket To Printer</Li> </Ul> <Strong>Bom Pcb Box</Strong> <Ul><Li>3X M3 Nuts - Pcb</Li> <Li>3X M3 15 Screws - Pcb</Li> <Li>2X M3 Nuts - Bracket Pcb</Li> <Li>2X M6 Screws - Bracket Pcb</Li> </Ul> <Strong>Bom Misc</Strong> <Ul> <Li>2X Screws To Attach Bracket To Printer</Li> <Li>40-Pin Idc/Gpio Male To Female Cable</Li> <Li>You Can Use The Dupont Connectors/Cables</Li> </Ul> I'M Going To Be Using It For My <A Href="Https://Betrue3D.Dk/Blog-Posts/" Target="_Blank">Betrue3D Printer Project</A> (Opens My Blog).
Statistics
Likes
20
Downloads
0