I-Beam
Description
This Is An I-Beam I Made On Autodesk Inventor. There Is A 90° Difference(Not Necessary Twist) Between The Bottom Sketch And Top Sketch Of The Part. I Used The Loft Feature To Generate This Surface. No Supports. You Can Choose A Resolution But Note That Lower Layer Height Yields Better Results. I Recommend You Print Vertically. ********************************************************************************************************* This Peice Has A Pardox Feel To It But It'S Very Strong And Light(When Printed/Manufactured Properly). I Hope This I-Beam Can Be Used In Real World Applications.
Statistics
Likes
10
Downloads
0