Maker Select Plus spool holder supports
Description
***Note: It Dawned On Me Much Later That I Had Made This Compatible Only With The 500G Spools I Had Been Using For A While.The 1Kg Will Go On But The Inner Part Rubs Against The Spool And Hinders The Feeding. There Needs To Be A Little More Width In The Base To Solve This.*** Spool Holder Supports To Be Combined With Rodless Spool Holder:(Https://Www.Thingiverse.Com/Thing:2409541). I Was Inspired By Both Jimjayjimmy'S Supports (Https://Www.Thingiverse.Com/Thing:2401572) And Construtor'S Spool Holder To Create My Combo Support To Fit The Maker Select Plus. Using The Idea Of The Supports Jimjayjimmy Created For The Tevo, I Designed My Own Supports With A Little Added Stability. The Rodless Spool Holder Makes A Lot Of Sense To Me Because The Pivot Ends Up Through The Center Of The Spool So There Is No Drag As It Spins. I Am A Novice Designer So This May Not Be A Perfect Design But It Was Repaired In Windows 3D Builder So It Should Be Fine. Note: I Had To Print The End Cap For The Rodless Spool Holder At 97% To Get It To Screw In Properly (Had To Grip It With Pliers) As The Full Size Didn'T Work For Me. The Other Two Parts Were Printed Full Size Though.
Statistics
Likes
16
Downloads
0