1/2" EVA Foam Bevel Cutter V2
Description
Useful For Cutting Precise 90°, 60° (30° If Cutting From The Back Side), And 45° Cuts With 1/2" Eva Foam. I Used A Similar Design As [Niezam'S](Https://Www.Thingiverse.Com/Niezam) Simple [Foamboard Cutter](Https://Www.Thingiverse.Com/Thing:877172). I Also Have: * [5Mm Eva Foam Bevel Cutter](Https://Www.Thingiverse.Com/Thing:3338858) * [10Mm Eva Foam Bevel Cutter](Https://Www.Thingiverse.Com/Thing:4050639) Files: * 0.5In_Foam_Bevel_Cut_V2_Window.Stl : Least Amount Of Material And Hardware (This Is The One I Use With M3X5Mm Screws) * 0.5In_Foam_Bevel_Cut_V2_Window_Nuts.Stl : Same As Above But Slightly Wider Holes In Case You Want To Use M3X8Mm+ Screws With Nuts * 0.5In_Foam_Bevel_Cut_V2_Nowindow.Stl : Hollow Center But Full/Flat Sides * 0.5In_Foam_Bevel_Cut_V2_Safety_Block.St L: Optional Block To Safely Hold The Cutter When Not In Use Hardware: * M3 Screws (X2), 5-10Mm Should Work Fine * Utility Blade (The Trapezoid-Shaped Kind With 2 Slots On Top)
Statistics
Likes
158
Downloads
0