Sink drain spring clip alternative
Description
This Is A Sleeve And Cap That Replaces The Spring Clip That Holds The Clevis Strap To The Pivot Rod. The One Under My Sink Would Never Stay On So I Made Something That Would Hold The Strap In Place But Still Be Removable. These Parts Are Made To Fit A Standard 4.78Mm Rod. As These Are Precision Fit Parts It Is Highly Recommended That You Use Calibrated Filament Using The System Found Here: Http://Www.Thingiverse.Com/Thing:1037301 A Pair Of Pliers Can Be Used To Provide A Flat Surface To Tap Against With A Small Hammer To Slip The Sleeve Over The Rod.
Statistics
Likes
7
Downloads
0