fidget spinner for 625 bearings
Description
This Is A Nice And Simple Model For A 3 Legged Fidget Spinner For 625 Sized Bearings Which Are Commonly Used On 3D Printers. To Make This Spinner, You Will Need To Print: 1X Fidget Spinner.Stl 2X Spinnercap.Stl You Will Also Need 4X 625 Size Bearings. The Cap Should Be Printed Upside Down (Top Down); Assembly: The Bearings And Caps Need To Be Hammered In To Place, Without Damaging The Bearings. 1.After Printing, Put The Spinner On A Flat Surface, Take One Bearing And Place It On One Of The Spinner Holes. 2. Take A Block Of Scrap Wood- And Place On Top Of The Bearing 3. Hit The Wood With A Hammer Until The Bearing Sits Flush Inside The Spinner. Repeat The Process For All 4 Bearings, And 2 Spinner Caps 4. Enjoy Your Spinner!
Statistics
Likes
2
Downloads
0