Idler Pulley for 624 Bearing and GT2 belt
Description
This Is An Idler Pulley To Suit A 624 Bearing (4X13X5Mm). The Pulley Outer Diameter Is 18Mm, Internal Diameter 13Mm And Overall Height Is 8.4Mm. The Pulley Outer Channel Is 6.4Mm High By 1.5Mm Deep. Assemble With A 624 Bearing, M4 Machine Screw And An M4 Washer To Give Some Clearance For The Bearing To Rotate. I Made This Pulley To Stop The Belt From Slipping Off The Bearings In This Drawing Robot: Https://Www.Thingiverse.Com/Thing:1517211 There'S Also A Spacer Included With 8Mm Od X 4Mm Id X 3.5Mm Height, Which Was Needed With The Drawing Robot, To Add A Bit Of Clearance To Fit The New Pulleys.
Statistics
Likes
129
Downloads
0