Anet A8 E3d v6 tronxy sensor mount RIGHT
Description
This Is Another Remix From Achmed20. Seems To Have Good Stuff. This Mount Looked Real Good. Nice And Close To The Extruder. Also Very Simple. The Only Problem Was My Cooling Fan Is Where Is Has The Sensor. So I Simply Mirrored It. That'S All. Just A Right Hand Version Of The Original. Here Are The Specs From The Original From Achmed20'S Post Keep In Mind The Sensor Is On The Other Side So It Will Have To Be Tweaked...: Anet A8 Marlin / Skynet Settings Here Are The Settings For Marlin / Skynet Thast Work With My Mashine. Be Careful With The "Z_Probe_Offset_From_Extruder ". Y Axis Is Smaller Then Stock Because Tech2C'S Holder Sits Way More In The Front Then The Stock Printhead. #Define X_Probe_Offset_From_Extruder -18 // X Offset: -Left +Right [Of The Nozzle] #Define Y_Probe_Offset_From_Extruder 0 // Y Offset: -Front +Behind [The Nozzle] #Define Z_Probe_Offset_From_Extruder -2 // Z Offset: -Below +Above [The Nozzle] #Define X_Max_Pos 240 #Define X_Min_Pos -20 #Define Y_Max_Pos 195 #Define Y_Min_Pos -30 #Define Left_Probe_Bed_Position 25 #Define Right_Probe_Bed_Position 215 #Define Back_Probe_Bed_Position 190 #Define Front_Probe_Bed_Position 15
Statistics
Likes
19
Downloads
0