Electronicbox for Bladeless Fan Version 2 by Helix3D
Description
Hi, I Build Up The Bladeless Fan And Noticed That There Is No Case For The Electronics. I Made A Housing For It And Glued It With Hot Glue On The Backside Of The Housing. I Also Added A Main Switch To The Case. If You Don´T Want A Switch Use The Closed Box, Also For Those Who Don´T Want A Logo On The Cover Use The Closed One ;) You Need 4X M3 Nuts And M3X16 Screws. I Heated Up The Nuts With A Lighter And "Glued" It In The Box. After You Glued The Electric Box On The Housing Drill A Hole In It. I Had To Soldering The Wires Of The Speed Controller, Because They Were To Short. I Fixed The Cable From The Power Adapter With A Cable Tie.
Statistics
Likes
27
Downloads
0