WaveShare 5inch Display Housing and Display Mount
Description
Note: Before Printing Please Check, If It Looks Sane For You! Some Of The Models Around Thingiverse Seem To Have Been Designed For A Different Version Of The Display. My Display And My Raspberry Did Not Fit Into Those Housings, So I Designed This One. This Model Contains A Housing That Fits A Waveshare 5Inch Display (Version 2) Including A Raspberry Pi 3. The Project Contains Two Versions Of The Model: * Normal Box Without A Mount * Housing With A "Wall Mount" With A Movable Arm I Use The Second Version To Mount A Raspberry Pi Running Pronterface Mounted To My Printer-Housing. The Movable Arm Allows Routing Cables Inside The Arm. It Is Basically Possible To Also Route The Power-Supply Inside The Arm, But I Still Need To Solder Micro-Usb Connector That Is Small Enough To Fit Into The Housing. To Close The Housing, I Used The Spacers Included In The Waveshare Package Including Addidional M3 Screws For The Front-Plate. The Arm Is Fixed With M3.5 Metal Screws. Those Can Be Easily Removed To Allow Access To The Usb And Ethernet-Ports Of The Raspberry Pi.
Statistics
Likes
20
Downloads
0