Brushless motor cable protection
Description
I Made This To Protect The Motor Cables On The Arms From Prop Strikes When Using 4 In 1 Escs. It Is 30Mm Long And 5Mm Inner Diameter. Weighs About 1 Gram Each. I Put The Cables Inside One By One, Turn It So The Slit Sits On The Arms And Stick It With Double Sided Tape. There Is Enough Surface For The Tape To Stick. I Uploaded It Upside Down And This Is How I Print It. Recommend Petg Or Abs. Enjoy!
Statistics
Likes
2
Downloads
0