Diving Camera Tray for compact cameras
Description
This Is An Easy To Print 5 Part Dive Tray. You May Attach Lights With Flex Tubes To The Handle Bars If Needed. I Have Joined The Parts By Inox Screws For Longer Lasting Parts. I Used The Tray For Several Salt Water Dives Down To 43M / 140Ft Max Depth. The Tray Did Not Pick Up Water And Could Withstand A Test At Land Held At Only One Handle With Camera + 2 Lights Attached. The Wider Base Makes The Tray Quite Stable Under Water. So When Filming You Will Have Less Shake. What You Need: 4X M6X25Mm 4X M6 Nuts 2X 6X60Mm Or 6X70Mm (Mounting The Bars To The Tray Extensions) Several 6Mm Washers 2X Rubber Bicycle Handle Bar Grips For 22Mm Bars 1-3X 1/4" Unc Tripod Mount Screws, 15-20Mm Long (Depending On Your Camera Case) Optional For Lights: 2X 5X50Mm (Mounting The Pipe Caps To The Bars) 2X 3/4" Pipe Caps With 5Mm Hole Drilled In Center 2X 3/4" Flex Pipes / Coolant Pipes 2X 5Mm Washers 2X 22Mm Rubber Washers To Stop Tubes From Rotating In The Cap The Lights Seen In The Photos Are Attached To A Wall Mount Tube Bracket, Welded To The Flex Tube.
Statistics
Likes
30
Downloads
0