Classic Car, Substitute 1971 Dodge Challenger Fender Clip, Wide Chrome "Spring Package"
Description
I Designed These For A Friend That Is Restoring A 1971 Dodge Challenger, That Had The "Spring Package" Wide Nose Chrome Moldings. The "Spring Package" Is Found On The 1971 Dodge Challenger Only, And Was A One Year Option. The Clips Are Used To Attached The Two Fender Wide Chrome Moldings Only. I Created Two Different Versions That Were Suitable For 3-D Printing. I Printed Them In Petg At A 45° Angle. This Was A Good Compromise Between Minimal Supports And Strength. I Think It'S Important To Stay Away From 0° As That Would Line Up The The Layers With The Fender Sheet Metal And Could Lead To Delamination. Due To Outside Temperatures I Use Petg Even Though Abs Does Have A Higher Temperature Profile It Can Have Problems With Layer Adhesion. I Did A Little Torque Testing With Both Designs In Polymax Pla And Petg And They All Came In At About 17 In-Lbs. Hope This Helps The Classic Car Community. If This Helps Please Leave A Comment And/Or A Maker Picture. Updated 1/20/2020 ************************************************************************ I Added A New File That Will Print With No Support And Is Ready To Print, No Rotation Needed. I Cut Off 1Mm From The Edge So It Would Sit Flat. File Name Ez_Print... Recommend: Perimeters 4, 100% Infill, No Support, 0.2Mm Layers, Already Rotated, (Petg Or Abs) And No Brim Needed But Can Be Added. Also I Printed 4 At A Time To Give It Cooling Time Between Layers.
Statistics
Likes
5
Downloads
0