K8200 Titan Aero Mount with integrated BLTouch Mount (v2)

Description

[Edit: In Version V2 A New Variant With A Thinner Mounting Plate Has Been Provided (5Mm Instead Of 7Mm), As Some Users Have Reported Problems With The Length Of The Original Mounting Screws For The Stepper.] With This Thing, You Mount An E3D Titan Aero (Tm) To Your K8200 (Tm). The Smaller Bltouch (Tm) Mount Is Optional. Because The Full Assembly Is Mounted Below The Z Axis Profile, The Hot-End Is A Bit Lower Than With Other Settings (So You Might Lose 10Mm Of Your Total Build Height), But It Is Very Stable And The Filament Feed And Tensioner Are Quite Well Accessible. The Whole Mount Slides Diagonally Over The Aluminum Bar In A 45-Degree Angle (No Breakable Snap-In). I Added An Adjustable Mount For The Bltouch Sensor, Which Is Not Perfect But Keeps The Sensor As Near To The Nozzle As Possible. Thus It Interferes A Bit With The Big Extruder Gear, But A 1.5Mm Clearance Is Built In. Disclaimer: This Is Work In Progress. I Have Not Installed Mine Yet, As I'Ll Have To Design A New Fan Duct First, As The Stepper Is In The Way.

Statistics

Category

Tags