Bearing Holder 10mm & 12mm
Description
Bearing Housing For- 10Mm & 12Mm Linear Bearings- ( Scs-Uu ) Bearing Position & Mounting Holes Are In The Same Place As The Aluminium Housings,,, They Are Designed To Reduce The Weight Of The Mainbed,,, Square M3 Nuts Are Used On Both The 10Mm & 12M And Theirs A Hex Nut Version For The 12Mm -- Mounting Holes Are 3Mm Diameter,, The Parts Fit Together Perfectly – They Have A 0.2Mm Offset And The Corners Have Been Recessed So Corner Swell Is Not A Problem A 0.5Mm Bevelled Edge Is On The Inside Clamp Edge So First Layer Flashing Is Not A Problem Either,,,– No Clean-Up Or Very Little Is Needed Depending On Your Printing Quality– They Have Been Printed And Tested A Dozen Times 12Mm Or 1/2 Inch 4 Gauge Pan Head Screws Should Be Used On The Sides Of The Bearing Holder But M3 Bolt Or Even Glue Or Thermal Weld Can Be Used And 3/8 Inch Or Up To 10Mm On The Topside Of The 10Mm Version --------------------------------------------------- There’S The Bearing Spec Sheet Which I Used For A Reference Include With The Download --- Heat The 4-Gauge Screw Tips With A Flame For A Clean Thread Cut,, Sketchup Files Is Included For Mod Work -=Mindless=-
Statistics
Likes
60
Downloads
0