Andonstar 2MP 40mm ring light adapter
Description
This Is A Led Ring Light Adapter That Takes 40Mm 12 Led Ring Lights (For Example Https://Www.Amazon.Com/Uxcell-2Pcs-White-Angel-Headlight/Dp/B00Npz8W48) And Attaches To The 12Mm Shaft Of An Andonstar 2Mp Usb Microscope. The Lid Lets You Insall A Diffuser Out Of Paper Or Diffuser Material From An Broken Lcd Monitor (Cut Two Concentric Rings 40Mm Outside And 12Mm Inside) Designed It For My Pick And Place Machine, But Turns Out To Be Useful For General Microscope Use. The Built In Ring Light Is Too Close And Makes It Difficult To Read Chip Markings. Printing The Mount: Orient The Model So The Base (The Opening For The Led Ring Light) Is Down. You Will Probably Need Supports "Touching The Buildplate Only". I Also Used A Raft On This Part To Keep Things Nice And Clean. Everything Touching The Raft And Support Will Be Covered By The Lid. Printing The Lid: Flip The Lid So The Flat Side Is Down (Fusion Exports It In The Orientation Of The Original Assembly)
Statistics
Likes
9
Downloads
0