Vernier Kidwinds Motor Mount
Description
I Bought This Packet (Http://Www.Rhombus.Be/Contents/Nl/P1809_Basic_Turbine_Building_Parts.Html) To Experiment With Wind Power. It Contains Out A Generator, Mounting For The Windmill Wings And Sticks To Hold The Wings. You Can Buy A Base With It, I Prefer To Engineer It Mystelf. You Need 1X Motormount 3X Bottom 3X Verhoging For The Height If You Want To Go Higher You Can Use Koppelstuk To Attach 2 X Verhoging Together. The Couplings Are Not A Tight Fit So I Use A Polymer Glue To Attach The Parts Together. The Reason That Larger Parts Are In Seperate Pieces Is Because I Use The Hobby Printer Vertex K8600 That Prints In A Volume Of 8X8X8Cm I Only Need To Attach The Bottom Pieces To A Heavy Surface And Shorten The Wooden Sticks A Little Bit And Then Constructing Wings For It To Test Out The Effeciency. I Used 2 Middle Pieces Together It All Depends On How Large Your Wing Design Is.
Statistics
Likes
2
Downloads
0