Hypercube Evolution Y-Carriage for 10 mm Axis & X-Endstop-Flag
Description
I Made A Modification From The Original By Nedalive. It'S Designed For 10 Mm-Y-Axis Instead Of The Original 8 Mm. All Other Parts Are Unmodified. Update 1.1: Added Some Distance-Cones To Reduce The Idler-Gaps. Sank The Screws For The 8Mm-Clamps. Update 1.2: Added A Little Gap For The Endstop-Flag And Removed The Distance-Cone Instead. Update 1.3: Increased The Inner Diameter Of The 8Mm-Axis By 0,25 Mm Update 1.4: Added A Modified X-Endstop-Flag, Because The Original One From Scott Doesn'T Fit Anymore, Especially If You Use My Modified Extruder-Mount (Https://Www.Thingiverse.Com/Thing:2437292) The Original One Was Turning Annoyingly And This Is Solved With My Design. Have Fun.
Statistics
Likes
17
Downloads
0