MeGaTroN Cooler Fanduct Tevo Tarantula 40x40x20
Description
### Megatron Cooler V2.0 Updated To V2.0 ### What'S New - More Rigidity With 1.2Mm Walls Instead 0F 0.8Mm - Support For The Black Tube Supplied . - Better Heater Cables Holder ###Printing >Abs Recommended Printing Time About 2.5 Hours Speed: 40Mm/S Outside Walls Speed: 20Mm/S Initial Layer Speed: 20Mm/S Layer Height: 0.2Mm Brim: 5Mm Supports: Touching Build Plate Only (Not Needed But Is Wise To Add) Infill: 30% (If You Use Pla Turn On The Layer Fan On The Second Layer) ###Main Features > Uses A 40X40X20 Blower On The Top Of The Carriage Full X Axis Travel - If You Are Using Standard Acrylic Enclosure For The Controller Some Fan Ducts Will Hit Before The 200Mm There'S A Flow Compensation Divider On The Blower Connector You Can Run It Full Speed Without Having Thermal Runaway Problems. Fan Grill Is Here: Https://Www.Thingiverse.Com/Thing:2568774
Statistics
Likes
62
Downloads
0