Electric skateboard motor mount - Caliber trucks - 5055 motor
Description
Update 2017-08-24: New Slightly Stronger Design Including A Protective Cover For The Belt Pulley. The Cover Should Be Installed Using 2X M3 25Mm Screws And 2X M3 Nuts. _______________________________________________________ Remix Of Solidgeek'S Design. His Design Is For 63Mm Motors, This Is Remixed To Fit 50Mm Motors. He Uses 15T And 40T Pulleys, With A 295Mm Belt. I Will Use With 12T, And 40T Pulleys And A 270Mm Belt. I Have Not Yet Tested It Out, So Small Adaptions To Ensure Belt Tension Might Be Needed. The Truck Locking Ring Is Identical To His. Solidgeek'S Description: >This Is My Custom Motor Mount Made For My Electric Longboard. I Recommend Printing It In >Abs Or Some Pla With Carbonfiber (15-20%). The Mount Consists Of A Mounting Plate, A >Locking Ring And A Shield. I Have Made A Version Of The Mounting Plate Without Shield. > >The Mounting Plate Needs Spacers Between The Motor Bolts And The Plastic Mount. I Have >Made Some In Aluminium On My Cnc That Fits Right On, However I Believe A Standard >Washer Would Suffice. > >My Setup Uses A Wheel Pulley With 40T And Motor Pulley With 15T - And My Belt Is A 295 >Mm Htd-5M. > >Hope You Enjoy :-)
Statistics
Likes
96
Downloads
0