Raspberry Pi Stacking Tray
Description
I Have Seen Other Stacking Trays For The Raspberry Pi And Liked The Idea. I Designed This Tray Differently So That I Would Have Easy Access To The Micro Sd Card And Better Access To The Gpio Pins. Also I Made The Base Layer Of The Tray Thicker So That It Didn'T Feel As Flimsy. Minimal Or No Post-Processing Should Be Needed. However If You Print In Abs The Droop/Sag Of The First Layers Might Require The Holes To Be Opened Up A Bit. I Have Included The Sldprt If You Want To Modify This Design Or Export The Stl With Lower Resolution.
Statistics
Likes
41
Downloads
0