Traditional Marudai for Kumihimo ( Japanese Braid )

Description

A Marudai (丸台 Marudai) Meaning "Round Stand" Is The Most Common Of The Traditional Frames Used For Making Kumihimo, A Type Of Japanese Braid The Original Marudai Disk(Kagami) Is Supposed To Have 3Mm Thickness But I Did A 2Mm Version If You Want To Print Faster And With Less Material. You Can Build The Marudai In Several Ways: 1 Print The Marudai Disk, The Base And 4 Legs If You Have A Big Printer And You Dont Worry About The Time And The Material 2 Print Only The Marudai Disk And Make The Base And The Legs In Real Wood 3 Build The Entire Marudai In Wood If You Are Confident In Your Skills You Can Scale Down The Marudai At 75% If You Want Faster Printer Time And Less Material The Infill Is 5% But If You Want More Strength You Can Go To The Infill You Like. For The Tama ( Bobin) You Should Use 100% Infill To Get The Correct Weight, Also You Can Print It With 0% Infill And Drill A Hole And Fill It With Sand, The Tama Should Weight 100G

Statistics

Category

Tags