AnetA8_E3D_V6_Holder_TronxySensor
Description
This Is A Remix Of Dousi'S Anet A8 Bowden Conversion. I Found That The Hotend Holder Needed Tweaking As My Divaks E3D V6 Seems Too Short So The Fan Duct Was Lower Than The Nozzle. I Have Added Slots So The Part Fan Can Be Moved Up And Down Meaning Any Fan Duct Can Potentially Be Used On This Mount. I Also Did The Same For The Tronxy Sensor As I Was Not Comfortable With A Fixed Point. All Remixed In 3Ds Max And Ran Through Netfabb To Double Check For Any Errors **Update** **Hotend_Holder** So After Printing The Hotend Holder, I Noticed That The X-Carriage No Longer Fitted As I Made It Too Thick On One Part. Also The Sensor Mount Needed Extending As The Sensor Was Above The Fan Duct So Wouldn'T Lower Down To Its Tolerance. **X-Carriage** I Remodeled The X-Carriage As I Didn'T Want The Name Attached And Also Added Cable Covers On The Sides With Hinges To Keep The Sensor, Hotend And Fan Cables Tidy. **Not Printed This Remodel Yet So Not 100% If The Hinges Will Work Properly, If Unsure Just Print Dousi'S As It Will Still Fit All These Parts** **Fan_Duct** The Original Fan Duct Was Just Too Small For My Heating Block And .4 Nozzle So I Have Modeled A Square Fan Duct That Will Fit Around The Heating Block. With This Design And The Slots On The Hotend Holder You Can Easily Position This Up And Down To Find The Perfect Height To Cool Your Parts
Statistics
Likes
10
Downloads
0