ImpulseRC Alien 5" RGB ws2812b rear bumper with 45° antenna mount for Unify pro
Description
<B>Its A Rear Bumper For The Impulserc Alien Frame.</B> Please Use Flex Filament. Pla Or Abs Aint No Good For This Part. It Holds The Antenna Socket From A Unify Pro 5V Or Hv In A 45° Angle. That Means You Can Use The Short Version Of A Tbs Triumph To Compensate The Extra Weight Of The Printed Bumper. Its Designed To Hold 3 Of These Ws2812B Rgb Leds Which Can Be Controlled By Kiss Fc Version 1.2 Or Higher Or Any Betaflight Compatible Fc. Http://Www.Ebay.De/Itm/New-Ws2812B-4-5V-5050-Rgb-Led-Lamp-Panel-Board-4-Bit-Precise-For-Arduino-/272482002329?Hash=Item3F71316599:G:7-8Aaosw6Dtytrrq Use Some Nylon Screws And Nylon Nuts To Screw The Led-Boards On The Bumper. Please Do Not Use Metal Screws Or You Will Short Out The Leds. You Can Fill The Caps With Epoxy To Make It Even More Crash Resistance. Use A Very Sharp Knife To Get Rid Of The Support Material. Its A Pain To Clean This Up So Take Your Time. If You Like This Design Please Check Out My Youtube Channel And Give Me A Like Or Two ;) Https://Www.Youtube.Com/Channel/Uchtmnyrym60Cbvzfyuxtwsg?View_As=Subscriber
Statistics
Likes
23
Downloads
0