Tail Light, Turn Signal, Reverse Light
Description
I Am In The Middle Of Converting My Wife'S Car That Got Rear Ended Into A 3 Wheeled Reverse Trike. And I Was Looking At All The Light In The Store And You Have To Have Several Different Lights For 4 Things. So I Designed This New Tail Light, Turn Signal, Reverse Light, And Parking Light, And All In One Light That Does Everything. It Has 96 5050 L.E.D.'S Once I Get Done Soldering The Micro Wiring I Will Seal Up The Light In A Clear Epoxy. But As You Can See In The One Picture With Only 1 Strip Lite Up And Cover On, It Is Very Seeable. Imaging Having All The L.E.D.S Lite Up. I Will Post Some Pictures Once I Finish Wiring It Up, But For Now Have A Look. 7-27-2017: I Was Able To Solder On The Wires. The Wires Will Control Tail Light, Break Light , Turn Signal And Reverse Light. I Had To Make And Extra 1Mm Platform So I Could Place The L.E.D. Light On While I Soldered The Connections And Ran The Wire. Will Have To Put An Extra 470 Ohm Resistor On Tail Lights So They Dim A Little.
Statistics
Likes
11
Downloads
0